Demonstrates a library project for generating the Fibonacci sequence, focusing on publishing to Maven Central. Includes setup for credentials, namespaces, key generation, and CI integration for automated deployment.
This repository contains a simple library project, intended to demonstrate a Kotlin Multiplatform library that is deployable to Maven Central.
The library has only one function: generate the Fibonacci sequence starting from platform-provided numbers. Also, it has a test for each platform just to be sure that tests run.
Note that no other actions or tools usually required for the library development are set up, such as tracking of backwards compatibility, explicit API mode, licensing, contribution guideline, code of conduct and others. You can find a guide for best practices for designing Kotlin libraries here.
This guide describes the steps of publishing a library built with Kotlin Multiplatform to the Maven Central repository. To publish your library, you’ll need to:
This guide assumes that you are:
Most of the steps here are still applicable if you’re using a different setup, but there might be some differences you need to account for. An important limitation is that Apple targets must be built on a machine with macOS.
Throughout this guide, we’ll use the https://github.com/kotlin-hands-on/fibonacci repository as an example. You can refer to the code of this repository to see how the publishing setup works. You must replace all example values with your own as you’re configuring your project.
Artifacts published to Maven repositories are identified by their coordinates, for example com.example:library:1.0.0. These coordinates are made up of three parts, separated by colons: the groupId, artifactId, and version.
As a first step for publishing to Maven Central, you’ll need to have a verified namespace. The groupId of the artifacts you publish will have to start with the name of your verified namespace. For example, if you register the com.example namespace, you’ll be able to publish artifacts with the groupId set to com.example or com.example.libraryname.
To get started with publishing to Maven Central, sign in (or create a new account) on the Maven Central portal. Once signed in, navigate to Namespaces under your profile, and click the Add Namespace button. Here, you can register a namespace for your artifacts, either based on your GitHub account or a domain name that you own.
For a GitHub repository Using your GitHub account to create a namespace is a good option if you don’t own a domain name to use for publication. To create a namespace based on your GitHub account:
io.github.<your username> as your namespace. For example, io.github.kotlin-hands-on.http://github.com/kotlin-hands-on/ex4mpl3c0d.For a domain name To use a domain name that you own as your namespace:
example.com, enter com.example.Artifacts published to Maven Central must be signed with a PGP signature, which allows users to validate the origin of artifacts.
To get started with signing, you’ll need to generate a key pair:
The gpg tool that can manage signatures for you is available from their website. You can also install it using package managers such as Homebrew:
brew install gpg
Generate a key pair with the following command, and fill in the required details when prompted.
gpg --full-generate-key
Choose the recommended defaults for the type of key to be created. You can leave these selections empty and press Enter to accept the default values.
[!NOTE] At the time of writing, this is
ECC (sign and encrypt)withCurve 25519. Older versions ofgpgmight default toRSAwith a3072bit key size.
Next, you’ll be prompted to set the expiration of the key. If you choose to create a key that automatically expires after a set amount of time, you’ll need to extend its validity when it expires.
You will be asked for your real name, email, and a comment. You can leave the comment empty.
Please select what kind of key you want:
(1) RSA and RSA
(2) DSA and Elgamal
(3) DSA (sign only)
(4) RSA (sign only)
(9) ECC (sign and encrypt) *default*
(10) ECC (sign only)
(14) Existing key from card
Your selection? 9
Please select which elliptic curve you want:
(1) Curve 25519 *default*
(4) NIST P-384
(6) Brainpool P-256
Your selection? 1
Please specify how long the key should be valid.
0 = key does not expire
<n> = key expires in n days
<n>w = key expires in n weeks
<n>m = key expires in n months
<n>y = key expires in n years
Key is valid for? (0) 0
Key does not expire at all
Is this correct? (y/N) y
GnuPG needs to construct a user ID to identify your key.
You will be asked for a passphrase to encrypt the key, which you have to repeat. Keep this passphrase stored securely and privately. You’ll be using it later to access the private key.
Let’s take a look at the key we’ve created with the following command:
gpg --list-keys
The output will look something like this:
pub ed25519 2024-10-06 [SC]
F175482952A225BFC4A07A715EE6B5F76620B385CE
uid [ultimate] Your name <your email address>
sub cv25519 2024-10-06 [E]
You’ll need to use the long alphanumerical identifier of your key displayed here in the following steps.
You need to upload the public key to a keyserver for it to be accepted by Maven Central. There are multiple available keyservers, we’ll use keyserver.ubuntu.com as a default choice.
Run the following command to upload your public key using gpg, substituting your own keyid in the parameters:
gpg --keyserver keyserver.ubuntu.com --send-keys F175482952A225BFC4A07A715EE6B5F76620B385CE
To let your Gradle project access your private key, you’ll need to export it to a file. Use the following command, passing in your own keyid as a parameter. You will be prompted to enter the passphrase you’ve used when creating the key.
gpg --armor --export-secret-keys F175482952A225BFC4A07A715EE6B5F76620B385CE > key.gpg
This will create a key.gpg file which contains your private key.
[!CAUTION] Never share a private key with anyone.
If you check the contents of the file, you should see contents similar to this:
-----BEGIN PGP PRIVATE KEY BLOCK-----
lQdGBGby2X4BEACvFj7cxScsaBpjty60ehgB6xRmt8ayt+zmgB8p+z8njF7m2XiN
...
bpD/h7ZI7FC0Db2uCU4CYdZoQVl0MNNC1Yr56Pa68qucadJhY0sFNiB63KrBUoiO
-----END PGP PRIVATE KEY BLOCK-----
Your project will also need to authenticate with Maven Central to upload artifacts. On the Central Portal, navigate to the Account page, and click on Generate User Token.
The output will look like the example below, containing a username and a password. Store this information securely, as it can’t be viewed again on the Central Portal. If you lose these credentials, you’ll need to generate new ones later.
<server>
<id>${server}</id>
<username>l3nfaPmz</username>
<password>gh9jT9XfnGtUngWTZwTu/8241keYdmQpipqLPRKeDLTh</password>
</server>
If you started developing your library from a template project, this is a good time to change any default names in the project to match your own library’s name. This includes the name of your library module, and the name of the root project in your top-level build.gradle.kts file.
If you have an Android target in your project, you should follow the steps to prepare your Android library release. This, at a minimum, requires you to specify an appropriate namespace for your library, so that a unique R class will be generated when their resources are compiled. Notice that the namespace is different from the Maven namespace created in the Register a namespace section above.
// build.gradle.kts
android {
namespace = "io.github.kotlinhandson.fibonacci"
}
This guide uses vanniktech/gradle-maven-publish-plugin to help with publications to Maven Central. You can read more about the advantages of the plugin here. See the plugin’s documentation to learn more about its usage and available configuration options.
To add the plugin to your project, add the following line in the plugins block, in your library module’s build.gradle.kts file:
// build.gradle.kts
plugins {
id("com.vanniktech.maven.publish") version "0.29.0"
}
Note: for the latest available version of the plugin, check its releases page.
In the same file, add the following configuration. Customize all these values appropriately for your library.
// build.gradle.kts
mavenPublishing {
publishToMavenCentral(SonatypeHost.CENTRAL_PORTAL)
signAllPublications()
coordinates(group.toString(), "fibonacci", version.toString())
pom {
name =
description =
inceptionYear =
url =
licenses {
license {
name =
url =
distribution =
}
}
developers {
developer {
id =
name =
url =
}
}
scm {
url =
connection =
developerConnection =
}
}
}
Note that it’s also possible to use Gradle properties instead.
Some of the most important, required settings here are:
coordinates, which specify the groupId, artifactId, and of your library.You can set up continuous integration which builds and publishes your library for you. We’ll use GitHub Actions as an example.
To get started, add the following workflow to your repository, in the .github/workflows/publish.yml file.
After committing and pushing this change, this workflow will run automatically when you create a release (including a pre-release) in the GitHub repository hosting your project. It checks out the current version of your code, sets up a JDK, and then runs the publishToMavenCentral Gradle task.
[!NOTE] Alternatively, you could configure the workflow to trigger when a tag is pushed to your repository.
The script above disables Gradle configuration cache for the publication task by adding to the Gradle command, as the publication plugin does not support it (see this ).
This action will need your signing details and your Maven Central credentials. These will be configured as GitHub Actions secrets in the next section. The configuration of the workflow above takes these secrets and places them into environment variables, which will make them available to the Gradle build automatically.
To use the keys and credentials required for publication in your GitHub Action workflow while keeping them private, you need to place those values into secrets. From your GitHub repository, go to Settings > (Security) Secrets and variables > Actions.
Click on the New repository secret button, and add the following secrets:
MAVEN_CENTRAL_PASSWORD and MAVEN_CENTRAL_PASSWORD are the values generated by the Central Portal website in the section.
Note again that the names used for these secrets must match those used by the workflow that accesses their values.
With the workflow and secrets set up, you’re now ready to create a release that will trigger the publication of your library.
Go to your GitHub repository’s main page, and click on Releases in the menu in the right sidebar.
Click Draft a new release.
Each release creates a new tag. Set the name for the tag to be created, and set a name for the release (these may be identical). Note that setting a version here does not change the version of your coordinates configured in your build.gradle.kts file, so you should update that version before creating a new release.
Double-check the branch you want to target with the release (especially if you want to release from a branch that’s different from your default), and add appropriate release notes for your new version.
The checkboxes below allow you to mark a release as a pre-release (useful for alpha, beta, or RC versions of a library), or to set the release as the latest available one:
Click the Publish release button to create the new release. This will immediately show up on your GitHub repository’s main page.
Click the Actions tab on the top of your GitHub repository. Here you’ll see the new workflow was triggered by the GitHub release. Click it to see the outputs of the publication task.
After this task completes successfully, navigate to the Deployments dashboard. You should see a new deployment here. This deployment will be in the pending and validating states for some time while Maven Central performs checks on it.
Once your deployment moves to a validated state, you should see that it contains all the artifacts you’ve uploaded. If everything looks correct, click the Publish button to release these artifacts.
Note that it will take some time (about 15–30 minutes, usually) after the release for the artifacts to be available publicly on Maven Central. Also note that the library may be available for use before they are indexed on the Maven Central website.
There’s also another task available which both uploads and releases the artifacts automatically once the deployment is verified, without having to manually release them on the website:
./gradlew publishAndReleaseToMavenCentral
Et voilà, you have successfully published your library to Maven Central.
#feed channel in the (To sign up visit .)version# .github/workflows/publish.yml
name: Publish
on:
release:
types: [released, prereleased]
jobs:
publish:
name: Release build and publish
runs-on: macOS-latest
steps:
- name: Check out code
uses: actions/checkout@v4
- name: Set up JDK 21
uses: actions/setup-java@v4
with:
distribution: 'zulu'
java-version: 21
- name: Publish to MavenCentral
run: ./gradlew publishToMavenCentral --no-configuration-cache
env:
ORG_GRADLE_PROJECT_mavenCentralUsername: ${{ secrets.MAVEN_CENTRAL_USERNAME }}
ORG_GRADLE_PROJECT_mavenCentralPassword: ${{ secrets.MAVEN_CENTRAL_PASSWORD }}
ORG_GRADLE_PROJECT_signingInMemoryKeyId: ${{ secrets.SIGNING_KEY_ID }}
ORG_GRADLE_PROJECT_signingInMemoryKeyPassword: ${{ secrets.SIGNING_PASSWORD }}
ORG_GRADLE_PROJECT_signingInMemoryKey: ${{ secrets.GPG_KEY_CONTENTS }}
--no-configuration-cacheReminder: When using publishToMavenCentral, you’ll still need to check and release your deployment manually on the website, as described in the previous section. You may use publishAndReleaseToMavenCentral instead for a fully automated release.
SIGNING_KEY_ID is the last 8 characters of your signing key’s identifier.SIGNING_PASSWORD is the passphrase you’ve provided when generating your signing key.GPG_KEY_CONTENTS should contain the contents of your GPG private key file, which you’ve created earlier in the Export your private key section.Surfaced from shared tags and platforms — no rankings paid for.